3M™ Epoxy Adhesives

3M Epoxy Adhesives

Structural load bearing formulations for metal, rubber, glass and plastic. Structural adhesives offer many benefits over traditional mechanical and fusion fastening: greater design freedom, cleaner lines, less machining and preparation, lighter weight materials and often less overall cost. Available in duo-pak cartridges for easy pre-mixing of 2-part formulas during application and also available in bulk form.

3M DP-100 Scotch-Weld Epoxy Adhesive Clear

ID: DP-100

Category: Adhesives / EPX/Epoxy

3M DP-100 Scotch-Weld Epoxy Adhesive Clear

3M Scotch-Weld Epoxy Adhesive DP100 is a rigid, two-part epoxy adhesive. 1:1 mix ratio, 3-5 minute work life and handling strength in approximately 20 minutes. 3M Scotch-Weld EPX 400 mL applicator and mix nozzles are required for dispensing (not included).

  • 50ml, 200ml (12).
 
3M DP-100 Plus Scotch-Weld Epoxy Adhesive Clear

ID: DP-100

Category: Adhesives / EPX/Epoxy

3M DP-100 Plus Scotch-Weld Epoxy Adhesive Clear

3M Scotch-Weld Epoxy Adhesive DP100 Plus is a very flexible, fast-setting, two-part epoxy adhesive that cures clear and stays clear even when cured in larger masses. This epoxy stays clear, but not colourless when cured in large masses.

  • A very flexible adhesive provides strong, permanent bond even under vibration and impact.
  • Fast 4-minute work life with handling strength in 20 minutes at room temperature.
  • Good high shear and peel strength.
  • Flexible when cured, making it a good choice for bonding dissimilar surfaces.
  • 50ml.
 
3M DP-110 Scotch-Weld Epoxy Adhesive

ID: DP-110

Category: Adhesives / EPX/Epoxy

3M DP-110 Scotch-Weld Epoxy Adhesive

3M Scotch-Weld Epoxy Adhesive 110 is a fast setting, flexible, two-part epoxy adhesive. 1:1 mix ratio, 8-13 minute work life and handling strength in approximately 20 minutes. Flexible bonds to a variety of materials such as metals, ceramics, wood and many plastics.

  • Fast curing with handling strength achieved in 20 minutes at room temperature.
  • A toughened epoxy adhesive with good peel strength.
  • 1:1 premix system allowing gap filling.
  • High adhesion to metals.
  • Suitable for bonding metals and PCB mounting.
  • 50ml.
 
3M DP-190 Scotch-Weld Epoxy Adhesive Grey

ID: DP-190

Category: Adhesives / EPX/Epoxy

3M DP-190 Scotch-Weld Epoxy Adhesive Grey

3M Scotch-Weld Epoxy Adhesive DP190 has a low viscosity that allows for easy dispensing. Flexible bonds to a variety of materials such as metals, ceramics, wood and many plastics.

  • 90-minute work life.
  • High shear and peel strength.
  • Flexible.
  • 1:1 mix ration.
  • Translucent or grey colour.
  • 50ml.
 
3M DP-810 Scotch-Weld Epoxy Adhesive Tan

ID: DP-810

Category: Adhesives / EPX/Epoxy

3M DP-810 Scotch-Weld Epoxy Adhesive Tan

3M Scotch-Weld Low Odour Acrylic Adhesive DP810 has excellent shear and peel strength along with good impact resistance and durability. Has less odour than MMA acrylic adhesives.

Scotch-Weld DP-810 is a very fast curing, toughened two-part acrylic adhesive with uncommonly high peel and shear strength on oil steel, aluminum, plastics, glass and painted surfaces. 20 minutes handling strength. 10-minute work-life. 1:1 mixing ratio.

  • 50ml.
 
3M DP810NS Scotch-Weld Acrylic Adhesive Tan

ID: DP810NS

Category: Adhesives / EPX/Epoxy

3M DP810NS Scotch-Weld Acrylic Adhesive Tan

3M Scotch-Weld DP810NS Low Odour Acrylic Adhesive is a toughened, non-sag, two-part acrylic adhesive. 1:1 mix ratio, 10-minute work life and handling strength in approximately 10 minutes. Has less odour than MMA acrylic adhesives. Uncommonly high peel and shear strength on oily steel, aluminium, many plastics, glass and painted surfaces.

  • 10-minute work life.
  • Low odour.
  • Non-sag formulation.
  • 50ml.
 
3M DP-8005 Scotch-Weld Epoxy Adhesive

ID: DP-8005

Category: Adhesives / EPX/Epoxy

3M DP-8005 Scotch-Weld Epoxy Adhesive

3M Scotch-Weld Structural Plastic Adhesive DP8005 is a two-part acrylic based adhesive. 10:1 mix ratio, 3 minute work life and handing strength in approximately 3 hours.

3M Scotch-Weld Structural Plastic Adhesive DP8005 can bond many low surface energy plastics, including many grades of Polypropylene, Polyethylene, and Thermoplastic Elastomers (TPE`s) without special surface preparation.

  • 3-minute work life.
  • Structurally bonds polyolefins without surface treatment.
  • Medium viscosity.
  • 45ml / 490ml.
 
3M DP-8010 Scotch-Weld Epoxy Adhesive Translucent

ID: DP-8010

Category: Adhesives / EPX / Epoxy

3M DP-8010 Scotch-Weld Epoxy Adhesive Translucent

3M Scotch-Weld Epoxy Adhesive DP-8010 is a two-part acrylic-based adhesive (10:1 ratio by volume) that can bond many low surface energy plastics, including many grades of Polypropylene, Polyethylene, and TPO’s without special surface preparation. DP-8010 can replace screws, rivets, plastic welding, and two-step processes which include chemical etchants, priming or surface treatments in many applications.

  • Ability to Bond Dissimilar Substrates (Priming to Metal Surfaces May be Necessary).
  • Ability to Structurally Bond Polyolefins.
  • Room Temperature Cure.
  • Excellent Water and Humidity Resistance.
  • Very Good Chemical Resistance.
  • Scotch-Weld Adhesive DP-8010NS Has High Viscosity for Sag Resistance.
  • One Step Process - No Pre-Treatment of the Polyolefin Substrates Needed.
  • Solvent-free Adhesive System.
  • Convenient Hand-Held Applicator System.
  • 45ml / 490ml.
 
3M Scotch-Weld Acrylic Adhesive DP8005 Translucent

ID: DP8005

Category: Adhesives / EPX

3M Scotch-Weld Acrylic Adhesive DP8005 Translucent

A two-part structural acrylic-based adhesive that structurally bonds many plastics, including difficult to bond low surface energy materials. Can bond many grades of polyethylene, polypropylene and thermoplastic elastomers without surface preparation at room temperature.

  • 35ml & 250ml (12).
 
3M EPX Plus 9170 Scotch-Weld Epoxy Adhesive Applicator

ID: EPX Plus 9170

Category: Adhesives / EPX

3M EPX Plus 9170 Scotch-Weld Epoxy Adhesive Applicator

3M Scotch-Weld Adhesive Applicators are used to dispense Scotch-Weld Structural Adhesives in 50ml, 45ml and 35ml duo-pak cartridges, which snap quickly into this durable, lightweight applicator. With the simple squeeze of the grip this dispenser meters for easy dispensing with no worry or fuss.

 
Page 1 of 2 Next

Ordering

E: sales@adept-industrial.com.au
T: 1800 008 590

Accounts

E: accounts@adept-industrial.com.au
T: 1800 008 590

Sales & Support

Kieran McKenna
E: km@adept-industrial.com.au
M: 0418 258 464

Sales & Support

Adel Ghali
E: aeg@adept-industrial.com.au
M: 0418 292 795

Copyright © 1999-2017 Adept Industrial Solutions Pty Ltd, Australia. All Rights Reserved. Site Designed and Maintained by: e-assistance.com.au | GEO Trust