3M™ Structural Adhesives

3M Structural Adhesives

3M EPX Next Generation Structural Acrylic Adhesives. These toughened products offer excellent shear, peel and impact performance with improved adhesion to many plastics and metals, including some oily surfaces. This helps to build better products and improve productivity with longer shelf life, easier storage, and low odor options.

3M Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS

ID: DP8407NS

Category: Scotch-weld / adhesives

3M Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS

3M Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS is a gray structural adhesive with high overlap shear and peel strength with good impact resistance and durability. This adhesive was designed to bond permanently to bare metals with minimal surface preparation, but also bonds well to wide variety of other materials, including most plastics.

Recommended Applications

  • Metal office furniture
  • HVAC equipment
  • Specialty vehicles (ambulance, trailer, fire truck)
  • Recreational vehicles (snowmobiles and ATV’s)
  • Signage
  • Appliances
  • Metal fabrication

Brochures and Flyers:

Joint design for structural adhesives technical bulletin

Final Structural Adhesive Selection Guide

Final Powder Coating Brochure HiRes

Final Metal Bonder Brochure

Video: Final Metal Bonder Video

 
3M DP8405NS Scotch-Weld Acrylic Adhesive Green

ID: DP-8405-NS

Category: Adhesives / EPX / Structural

3M DP8405NS Scotch-Weld Acrylic Adhesive Green

3M Scotch-Weld Acrylic Adhesive DP8405NS is a non-sag, toughed, two-part acrylic adhesive. This toughened product provides improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes.

  • 5-minute work life with 20 minutes to structural strength.
  • Durable bond with excellent shear, peel and high impact strength.
  • Bonds to a variety of surfaces, including most metals and plastics.
  • High strength with minimal surface prep.
  • Features spacer beads to control bond line thickness to prevent excessive squeeze-out.
  • 45ml.
 
3M DP8410NS Scotch-Weld Acrylic Adhesive Green

ID: DP-8410-NS

Category: Adhesives / EPX / Structural

3M DP8410NS Scotch-Weld Acrylic Adhesive Green

3M Scotch-Weld Acrylic Adhesive DP8410NS is a non-sag, toughed, two-part acrylic adhesive. This toughened product provides improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes.

  • 10-minute work life with 38 minutes to structural strength.
  • Durable bond with excellent shear, peel and high impact strength.
  • Bonds to a variety of surfaces, including most metals and plastics.
  • High strength with minimal surface prep.
  • Features spacer beads to control bond line thickness to prevent excessive squeeze-out.
  • 45ml / 490ml.
 
3M DP8805NS Scotch-Weld Acrylic Adhesive Green

ID: DP-8805-NS

Category: Adhesives / EPX / Structural

3M DP8805NS Scotch-Weld Acrylic Adhesive Green

3M Scotch-Weld Low Odor Acrylic Adhesive DP8805NS is our standard low-odor, non-sag, toughened, two-part acrylic adhesive. This adhesive is an ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time.

  • 4-minute work life with 10 minutes to structural strength.
  • Low odor and non-flammable properties for a safer working environment compared to typical acrylic adhesives.
  • Durable finished bond with excellent shear and high impact strength.
  • Bonds difficult surfaces such as powder coats and most plastics.
  • 18-month room temperature shelf life simplifies inventory management.
  • Features spacer beads to control bond line thickness to prevent excessive squeeze-out.
  • 45ml / 490ml.
 
3M Scotch-Weld Low Odor Acrylic Adhesive DP8810NS

ID: DP-8810-NS

Category: Adhesives / EPX / Structural

3M Scotch-Weld Low Odor Acrylic Adhesive DP8810NS

3M Scotch-Weld Low Odor Acrylic Adhesive DP8810NS is our low-odor, non-sag, toughened, two-part acrylic adhesive. This adhesive is an ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time.

  • 10-minute work life with 38 minutes to structural strength.
  • Low odor and non-flammable properties for a safer working environment compared to typical acrylic adhesives.
  • Durable bond with excellent shear, peel and high impact strength.
  • Bonds difficult surfaces such as powder coats and most plastics.
  • 18-month room temperature shelf life simplifies inventory management.
  • Features spacer beads to control bond line thickness to prevent excessive squeeze-out.
  • 45ml / 490ml.
 
3M Scotch-Weld Structural Plastic Adhesive 8005

ID: 8005

Category: adhesives / Structural

3M Scotch-Weld Structural Plastic Adhesive 8005

3M Scotch-Weld Structural Plastic Adhesive 8005 is a two-part acrylic-based adhesive. 10:1 mix ratio, 3-minute work life and handling strength in approximately 3 hours.

3M Scotch-Weld Structural Plastic Adhesive 8005 can bond many low surface energy plastics, including many grades of Polypropylene, Polyethylene, and Thermoplastic Elastomers (TPE`s) without special surface preparation.

  • 3-minute work life
  • Structurally bonds polyolefins without surface treatment
  • Medium viscosity
 
3M DP-6310NS Scotch-Weld Urethane Adhesive Green

ID: DP-6310NS

Category: Adhesives / EPX/Urethane

3M DP-6310NS Scotch-Weld Urethane Adhesive Green

3M DP6310NS Scotch-Weld™ Multi-Material & Composite Urethane Adhesives are multi-purpose urethane adhesives for bonding a variety of composites, plastics, metals and wood. They are high-strength bonders with some flexibility to accommodate thermal expansion and contraction differences with dissimilar material bonding.

  • Two part urethane paste delivers outstanding strength and performance
  • Non-sag formulation resists running and slumping of adhesive
  • Primerless to most surfaces
  • 10 minute open time
  • Ability to bond most composites and dissimilar substrates
  • Excellent water and humidity resistance, very good chemical resistance
  • Cures at room temperature but can be accelerated with heat
  • 48.5ml

DP6310NS and DP6330NS TDS

 
3M DP-8010 Scotch-Weld Acrylic Adhesive Translucent

ID: DP-8010

Category: Adhesives / EPX / Acrylic

3M DP-8010 Scotch-Weld Acrylic Adhesive Translucent

3M Scotch-Weld Acrylic Adhesive DP-8010 is a two-part acrylic-based adhesive (10:1 ratio by volume) that can bond many low surface energy plastics, including many grades of Polypropylene, Polyethylene, and TPO’s without special surface preparation. DP-8010 can replace screws, rivets, plastic welding, and two-step processes which include chemical etchants, priming or surface treatments in many applications.

  • Ability to Bond Dissimilar Substrates (Priming to Metal Surfaces May be Necessary).
  • Ability to Structurally Bond Polyolefins.
  • Room Temperature Cure.
  • Excellent Water and Humidity Resistance.
  • Very Good Chemical Resistance.
  • Scotch-Weld Adhesive DP-8010NS Has High Viscosity for Sag Resistance.
  • One Step Process - No Pre-Treatment of the Polyolefin Substrates Needed.
  • Solvent-free Adhesive System.
  • Convenient Hand-Held Applicator System.
  • 48.5ml.
 

Ordering

E: sales@adept-industrial.com.au
T: 1800 008 590

Accounts

E: accounts@adept-industrial.com.au
T: 1800 008 590

Sales & Support

Kieran McKenna
E: km@adept-industrial.com.au
M: 0418 258 464

Sales & Support

Adel Ghali
E: aeg@adept-industrial.com.au
M: 0418 292 795

Copyright © 1999-2017 Adept Industrial Solutions Pty Ltd, Australia. All Rights Reserved. Site Designed and Maintained by: e-assistance.com.au | GEO Trust